Best Car Amplifier For Bass

12 Products Considered
94 Hours of Research
8 Experts Interviewed
201 Reviews Analyzed

I’m sure you’ll agree with me when I say this:

Buying the best car amplifier for bass can be a challenge.

It can seem like there are hundreds or even thousands of automotive products to choose from but there’s nothing that fits your specific needs. Oh, we know that feeling.

Best Car Amplifier For Bass
Best Car Amplifier For Bass
Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V

It sucks when you’ve got a budget to fit in and you want to find something that would be the best bang for the buck, but it’s impossible to narrow down the choices without spending hours (sometimes tens of hours) on research and reading the reviews on the best car amplifier.

We decided that it’s time for robots to do the hard work. Here’s how:

  1. With the help of Artificial Intelligence, we analyzed hundreds of thousands (no kidding) of reviews from verified owners on Amazon and reputable expert sources like Consumer Reports, The Wirecutter, PCmag, and many others.
  2. Every product got its own rating in each category (like “best something for bass”).
  3. We compiled lists of the best products in every category and created lists like the one you can see below
  4. We shared them with the public, so you guys could make informed decisions and save time.

For this article about the Best Car Amplifier For Bass we reviewed and evaluated more than 180+ car amplifiers. The AI (artificial) selected only those that received the top award. Only winners are listed below. You can see the highest overall rating of each item and a comprehensive breakdown of its characteristics.

Best Car Amplifier For Bass – Comparison Table

car amplifier Reviews and Buying Guide

With more choices than ever, it can be hard to find the car amplifier that’s right for you. And it can be frustrating to shop for the best car amplifier for bass, hoping to find the one that can help you. But don’t worry. With our tools and guides, we can help.

We provide consumers with the information they need to get the most out of their new purchases. We’ve discussed our favorite deals and services, and sorted out the strengths and weaknesses of each variation. We’ve even pinpointed what makes a good car amplifier, helping you identify and avoid the pitfalls of price gimmicks and overpriced automotive brands.

1,229 Reviews
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
141 Reviews
  • Tri-stage protection covers thermal, over-current and short circuits.
  • On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
  • Variable crossover 12dB/octave slopes
  • Infrasonic filter. Low-Pass: Variable 50Hz - 500Hz at 12dB/Octave
  • Optional Remote PEQ (Level control)
384 Reviews
  • 50 Watts x 4 @ 4-Ohm / 75 Watts x 4 @ 2-Ohm / 150 Watts x 2 @ 4-Ohm Bridged
  • Accepts High Level & RCA Level Input
  • Cast aluminum heatsink with Top Mount Controls
  • 12dB/octave crossover
  • Class A/B Circuit Topology
509 Reviews
  • The PRIME R1200-1D is an ultra-efficient mono amplifier (1.97" x 6.77" x 11.06") with top mounted controls and delivering 1,200 Watts RMS of power!
  • Optimized exclusively for use with subwoofers (RMS Power Output: 400 Watts x 1 @ 4-Ohm OR 800 Watts x 1 @ 2-Ohm OR 1200 Watts x 1 @ 1-Ohm). Average Current Draw (13.8V Music)- 55 A. Max. Current Draw (13.8V Sinewave)- 110 A
  • High efficiency, Class D design produces maximum power with minimal strain on the vehicle's electrical system while delivering rich, full bass to any system
  • Delivering more bass where you want it most with On-board Punch EQ with +18dB boost @ 45Hz and fine tune the output from the driver’s seat with the included Remote Bass Level Control
  • Featuring RCA pass-thru outputs, 12dB/octave Butterworth crossover, infrasonic filter, 4 gauge power/ground connectors, real time output and power supply thermal sensing, and MOSFET power supply
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
30 Reviews
  • RMS Power - 1 ohm Mono: 2000W
  • RMS Power - 2 ohm Mono: 1000W
  • RMS Power - 4 ohm Mono: 500W
  • Input Sensitivity ( =/- 5% ): 6 - 0.2 Volts
  • Dimensions: 16.53" L x 8.25" W x 2.32" H
384 Reviews
  • RMS Continuous Power: 40 Watts x 4 @ 4-Ohms, 60 Watts x 4 @ 2-Ohms, 125 Watts x 2 @ 4-Ohms Bridged
  • Works with factory installed & aftermarket source units
  • Onboard 12dB/octave LP/HP/AP crossover
  • On-board Punch EQ with +18dB boost at 45Hz
  • Class A/B Circuit Topology
150 Reviews
  • JX Series Monoblock Amplifier 500 rms @ 4ohms 750 rms @ 3ohms and 1000 rms @ 2ohms
  • Unregulated PWM switching type power supply
  • Variable Bass Boost (0 to +12 dB bass boost centered at 45 Hz)
  • Soft start turn-on prevent clicking and popping when system turns on
  • Dimensions: 11"L x 7-3/4"W x 2"H
413 Reviews
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
  • High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.
  • Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >100@ 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".
3,172 Reviews
  • POWER: Maximum Power Output of 1100 Watts at 2 Ohms into one channel. MAX power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • DIMENSIONS: The R1100M is 9.1 inches in Depth, 10.4 inches in Width and 2.3 inches in Height. It can be installed in a variety of different places due to its’ slim and compact design
569 Reviews
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel <1% THD+N. 4 Ohm: 300 Watts x 1 Channel <1% THD+N.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.
  • Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 13.1˝.
189 Reviews
  • Mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
  • Class D amp design
  • Speaker-level inputs with signal Sensing turn-on
  • Variable low-pass filter (50-200 Hz at 24 dB per octave)
241 Reviews
  • RMS Power Rating: 4 ohms: 500 watts x 1 chan. / 2 ohms: 800 watts x 1 chan. / 1 ohm: 1200 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply Wired remote bass level control included
  • Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals
  • Variable low-pass filter (40-240 Hz, 24 dB/octave) / Frequency response: 10-240 Hz / Dimensions: 12-3/8"W x 7-7/8"D x 2-3/8"H
201 Reviews
  • Mono Block Class D 4000 Watts (Peak Power) Amplifier
  • RMS Power Handling @ 1 Ohm: 750 Watts x 1/ RMS Power Handling @ 2 Ohms: 530 Watts x 1/ RMS Power Handling @ 4 Ohms: 300 Watts x 1
  • Total Harmonic Distortion (THD): < 1%/ Frequency Response 1dB: 10Hz?300KHz/ Signal To Noise Ratio: > 85dB
  • Low Level Input Sensitivity: 0.2-6V/ Dimensions LxHxW: 13.66 Inches x 2.05 Inches x 8.94 Inches
1,382 Reviews
  • POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
  • DIMENSIONS: The AR1500M is 10.3 inches in Depth, 6.5 inches in Width and 2.6 inches in Height. It can be installed in a variety of different places due to its’ slim and compact design

Price

If you buy a quality, top of the line car amplifier from a reliable brand and pay top dollar for it, you can be assured that it will perform to your liking.

Some price-conscious users seek out the cheapest products in the market to save money. These users want to make sure they get the best value at the lowest price without being scammed.

Other users simply want to get the best products and don’t care much about price.

We rated our top car amplifier list based on the quality first and only then price. So if you’re not sure whether you can afford an item, just click “Buy on Amazon” and check the price.

Last update on 2020-01-11 at 13:32 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.